Replacement UPVC Door Handles
If you're replacing the handles or need to add extra security you can choose the perfect handle for your door. Upvc handles are simple to install and conform to the required 92mm centres for multipoint locks.
The most important measurements to take into consideration are backplate fixing centres and lever/key hole dimensions. Compare these measurements with your existing marks carefully before ordering.
Lever/Pad
Lever pad door handles are made up of the lever handle on one side and a paddle-shaped handle on the other. They are designed to be used with key wind locks. However, they can be fitted to multipoint split spindle door locks.
Once you have selected the right handle for your doors, the finishes will be displayed in the drop-down list. Not all styles of handle are available in every finish though and it is recommended to check the sizes and technical drawings for the specific product you are looking to ensure that you can get the correct size and fit.
When choosing a new set of lever pad door handles made of upvc, it is important to ensure that they correspond to the PZ (distance between the spindle of the handle and the center of the hole in the cylinder) of your existing multipoint locks, since they have to be in line for the doors to remain locked, either from the inside or the outside. The handles we sell are designed to work with a variety of standard cylinder locks, however it is advisable to double-check before purchasing.
You'll need to take off your handles that you have already installed and then dismantle the lock case if you are upgrading to dual spindle handle levers as this will require a split cylinder inline. These can be bought separately and we have an entire technical diagram that you can examine in the images for each product.
It is a good thing to loosen the screws holding your existing door handle and then examine the mechanism. It is possible that you will need to loosen the screws a bit more when they aren't tight. Then you can remove the old spindle and handle and replace it with a new door handle made of upvc. Before putting the handle in position, it is a good idea to check that it is in the correct position. You can do this by putting your finger into the gap between the frame of the door and the door handle to make sure it is level.
Lever/Lever
The lever handles on doors are used to operate a multi-point lock with a Euro cylinder. They can be found on a variety of double upvc doors, as well as on some wooden and aluminum doors. They are equipped with an inside lever and an outside paddle and are typically available in two types. Sprung - These have a spring cassette inside the backplate to help bring the handle lever into an upright position. Non-sprung: These do not have a mechanism for bringing the handle lever into a horizontal position.
To fix a door handle lever that is sagging you'll need to locate the detent access pin or hole. It's typically an insignificant hole or protruding ring or rectangle found on the handle base plate. Once located you can loosen the set screw with the help of a screwdriver, and then remove it to allow the lever to return to the horizontal position.
When the handle is in a horizontal orientation, you can re-install the screws and tighten them until the handle stays secured to the base plate. It is also recommended to apply an adhesive that locks the threads of the screw to increase the grip and stop them from loosening over time.
There are a myriad of reasons why lever door handles droop. The most frequent cause is that the fixings are too tight, causing the lever bearing to get tangled against the door. It could also be because the levers are not being operated at a straight angle and this is compressing the latch mechanism, preventing it from fully springing back into service.
Another common cause is that the sprung lever is not functioning properly and this is usually due to the spring not being in the proper position within the backplate. To check whether the handle is back to horizontal, simply operate it.
It is important to fix any door handles that are loose as soon as you can. This could lead to excessive wear on the screws and the handle might be able to fall off the base plate. It is recommended to tighten all loose screws on a regular basis in order to prevent them from becoming loose.
Lever/Snib
These upvc handles are also called 'Snib handle sets' and come with an snib lock button located at the top of the lever. If you don't have a dummy locking device then you can use this feature to secure the door. They are typically fitted with a Fullex 68PZ (that's 68mm between the spindle's center and lever or the lock centre) door lock. We also stock a range of door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.
door handle repairs near me can update your home by changing your door handles whether you are replacing your existing handles or installing new ones on doors that you constructed. There are various styles available for door handles made of upvc including the traditional lever on backplate. Other choices include straight or curved short latches, and dummy knobs for multi-point locks. These are perfect for French doors.
Lever on backplate handles are typically rectangular in shape but there are also oval or circular models that are referred to as rose door handles. These kinds of door handles come with a lever or knob on a backplate, which sits behind the lever or knob and is sometimes referred to as the rosette, however certain back plates can be detached to allow for concealed fixing.
There's a wide selection of chrome and colored finishes available for these handles that complement your door and other hardware, including hinges, knobs, bolts and so on. Some handles come with grub screws that aid in the secure attachment of the knob or lever to the spindle. Some handles are equipped with bathroom spindles, which are suitable for bathroom locks. They also have a thumbturn release mechanism, and can be used on doors for bathrooms.
Mortise
If your front door's uPVC handle is stuck in the open position, the reason is likely to be due to the tubular latch. There are a few reasons for this, one of which is the simple lack of lubrication on the latch plate. This can be corrected quickly by opening the door and spraying lubricant onto the lock and handle. Alternatively, it could be that the latch plate is detached from the backplate. This could be more problematic and will require a specialist to fix.
A multipoint door handle is the ideal solution to solve the issue of a sticking door handle. These handles are attached to the faceplate and are operated by either a thumb turn or key knob that activates the cam that locks the deadbolt. The handles are available in a variety of different sizes to fit various types of uPVC doors. They also come in an array of attractive finishes that match the hardware you already have. The handles can be bought via the internet or from the local locksmith and are easy to install with clear instructions.
To select a replacement handle set, you will have to determine the PZ dimension of your cylinder. This is the distance in millimetres between the inside edge of the door frame and the center of the handle hole. You'll also require the type of lock on your door, whether it's a mortise or hook lock. Once you have these measurements, the simplest method to determine the right handles is to search by brand option on the website. This will narrow down the options and you can then choose the appropriate size from there.
A typical handle set includes an arm, two screws of different lengths, drill guides and installation instructions. The smart models, like the Igloohome Smart Mortise 2+, include a complete mortice lock with a built-in keypad. These are more sophisticated models and are ideal for professional installers or very competent DIYers. Some handle sets have a range of other accessories, such as weather strips, that can be used to improve the look of the door.